PHILMAC PUSH FEMALE METRIC END CONNECTOR PE x FI BSP
PE pipe to female BSP thread – tool-free and reusable. Push. Done.
The Philmac PUSH Female Metric End Connector transitions metric PE pipe to a female BSP thread, so a PE line can connect directly to male-threaded valves, pumps and other threaded infrastructure and equipment. The PE end is a tool-free Philmac PUSH connection; the threaded end conforms to ISO 7.1 for pressure-tight threaded joints.
Cut the pipe square, push it to the internal stop and the connection is made – no chamfering, no lubricant, no tightening. Thirteen size combinations run from 20mm x ½” to 63mm x 2″, covering irrigation systems, plumbing connections, rural water and civil work.
As with every Philmac PUSH fitting, the connector is WaterMark certified, pressure rated up to PN16, conforms to AS/NZS 4020 for drinking water, meets the lead-free requirements of NCC Volume 3 and is Australian Made. Loosen the nut and the PE end can be disassembled and reassembled without damaging components.
Sizes 32mm and above have a stainless steel reinforcement collar on the female BSP thread for added strength.
Key features & benefits
- PE to female BSP in one fitting – connect PE pipe to male-threaded equipment and fittings.
- Tool-free PE connection – cut square, push to the stop. Done.
- No pipe preparation – no chamfer, no lubrication.
- ISO 7.1 thread for pressure-tight threaded joints.
- Feedback when the pipe is ‘home’ – internal end stop confirms full insertion.
- Secure grip and seal – reverse-taper split collet and grip ring; radially compressed EPDM O-ring.
- Reusable – disassemble and reassemble the PE end.
- Certified for regulated plumbing – WaterMark, AS/NZS 4129, AS/NZS 4020, lead-free to NCC Volume 3, Australian Made.
Applications
- Connecting PE irrigation lines to male-threaded valves and equipment
- Plumbing water service connections to threaded infrastructure
- Rural water systems and pump connections
- Civil and utility pipelines terminating at threaded fittings
- Repairs where a PE line meets existing threaded equipment
Application notice
Philmac PUSH fittings are designed for connecting metric pressure polyethylene pipe. They are not suitable for compressed air applications, or for positive displacement pumps where the line pressure drops to zero between cycles. For those applications Philmac recommends Philmac EasyLOK fittings.
FAQs
What does a female end connector connect to? The female BSP thread accepts a male-threaded component – valves, pumps and other threaded infrastructure and equipment – while the other end is a tool-free push-fit connection for metric PE pipe.
What size combinations are available? Thirteen, from 20mm x ½” through to 63mm x 2″. Philmac’s recommended starter sizes are 20 x ¾”, 25 x ¾”, 25 x 1″ and 32 x 1″.
Do I need a tool for the PE end? No. Push the pipe to the internal stop. A standard wrench is only needed if you loosen the nut to disassemble.
Is it suitable for drinking water? Yes. The fitting is WaterMark certified, conforms to AS/NZS 4020 and meets the lead-free requirements of NCC Volume 3.
I need a male thread instead – which fitting? Use the Philmac PUSH Metric Male End Connector PE x MI BSP.
Reviews
There are no reviews yet.