- Application: General Low Pressure Air and Water
- Fitting Type: Drilled Flange
- Material: Malleable Cast Iron to ASTM A-197, ASTM A47
- Design Standard: EN 10242 : 1994
- Suitable for Water Application Used in General, Irrigation and Rural Services, Compressed Air Pipes and Fuel and Gas Lines Utilities
- Working Pressure: 150PSI
- Plating Standard: ISO 1461 – Hot Dip Galvanised Coating on Fabricated Iron and Steel Articles
- Thread: BSP – Pipe Thread Where Pressure-Tight Joints are Made on the Thread
- Comply with Australian Standards
Size (In) | Size (mm) | A (mm) | B (mm) | C (mm) | Approx Weight KG |
---|---|---|---|---|---|
1/2" | 15mm | 95mm | 12.7mm | 7.2mm | 0.29 |
3/4" | 20mm | 102mm | 15.9mm | 7.9mm | 0.33 |
1" | 25mm | 114mm | 17.5mm | 8.7mm | 0.46 |
1 1/4" | 32mm | 121mm | 19.1mm | 8.7mm | 0.45 |
1 1/2" | 40mm | 133mm | 22.2mm | 9.5mm | 0.62 |
2" | 50mm | 152mm | 25.4mm | 10.3mm | 0.96 |
2 1/2" | 65mm | 165mm | 30mm | 10.3mm | 1.28 |
3" | 80mm | 184mm | 33.8mm | 10.3mm | 1.75 |
4" | 100mm | 216mm | 39mm | 11.2mm | 2.63 |
6" | 150mm | 279mm | 41.7mm | 13.8mm | 4.72 |
Warranty
All products are covered by the full manufacturer’s warranty of 2 years. Should you have an item that is faulty we are happy to replace with a new one. Please contact us with details and/or photos of the fault as well as your contact details so we can discuss the issue and organise a replacement at our cost, or if you prefer we can provide a full refund. In some cases, we may request the item be returned to us depending on the issue.