Rural Poly Female Tee Connector – ANKA

• Type: Tee
• Size Range: 15mm (1/2″) – 50mm (2″)
• Pipe Fittings with these unique patented design will connect to a large range of pipes and hoses.
• Designed to fit: Australian Rural B, Thin wall Lateral pipe and a range of flexible hoses, suction and pressure.
• Manufactured from high grade Glass Fibre Reinforced Nylon makes these fittings strong and lightweight.
• Application:
• Hose
• Pumping
• Irrigation
• Marine
• Hydroponics
• Plumbing
• Agriculture
• Industry
• Landscaping
• Features and Benefits:
• Non Corrosive; using high quality materials approved for use with drinkable water
• Unique Blue Nut; which is very user friendly
• In most situations fittings can be put on cold

	Size	Male Fitting End		Female Fitting End	Threads Per Inch	Actual Barb End
Metric Size (mm)	Imperial Size (inch)	Inner Diameter (mm)	Outer Diameter (mm)	Inner Diameter (mm)		Outer Diameter (mm)
6	1/8"	3.18	10.16	10.16	28	3.18
7	3/16"				28	4
8	1/4"	6.35	13.66	13.66	19	6.35
9	5/16"				19	8
10	3/8"	9.53	17.17	17.17	19	9.53
15	1/2"	12.7	21.51	21.51	14	12.7
18	5/8"				14	15.88
20	3/4"	19.04	27	27	14	19.04
25	1"	25.4	33.93	33.93	11	25.4
32	11/4"	31.75	42.59	42.59	11	31.75
40	11/2"	38.1	48.48	48.48	11	38.1
50	2"	50.8	60.47	60.47	11	50.8
65	21/2"	63.5	76.09	76.09	11	63.5
80	3"	76.26	88.87	88.87	11	76.26
100	4"	101.07	114.14	114.14	11	101.07
150	6"	152	165.12	165.12	11	152

Column Definitions:
Size (Imperial):  Size designated to match the ID of Fitting in inches

Size (Metric):  Size designated to match the ID of Fitting in mm

Male Thread ID (mm):  The actual Inside diameter of the Male Fitting in millimetres.

Male Thread OD (mm):  The actual outside diameter of the Male Fitting in millimetres

Female Thread ID (mm):  The actual Inside diameter of the Female Fitting in millimetres.

Actual Barb OD (mm):  The actual outside diameter of the Barbed fitting in millimetres.

 

All products are covered by the full manufacturer’s warranty of 2 years. Should you have an item that is faulty we are happy to replace with a new one. Please contact us with details and/or photos of the fault as well as your contact details so we can discuss the issue and organise a replacement at our cost, or if you prefer we can provide a full refund. In some cases, we may request the item be returned to us depending on the issue.